UPC SC to UPC LC duplex OS2 single mode PVC (OFNR) optical jumper
An optical jumper, also known as a fibre jumper or fibre optic cable, consists of two optical fibres protected by a sheath and equipped with an optical connector at each end. Therefore, we offer you the super efficient single mode PVC duplex SC UPC to LC UPC optical jumper OS2. A new optical jumper is equipped with two fibre optic connectors. These connectors align and couple the optical fibres to ensure the transmission of light without any failure.
It has a wavelength of 1310/1550nm, with a maximum attenuation (db/km) of 1300/1500nm | 0.45/0.28, Single Mode Optical Fibre 9/125 (OS1). This optical jumper is super flexible and abrasion resistant, durable for indoor use. Designed for high bandwidth and transmission speed over long distances and complies with IEC-61754 and TIA-604 (FOCIS) standards.
Buy online your UPC SC to LC UPC duplex OS2 Singlemode PVC (OFNR) 2.0mm optical jumper at unbeatable price on Glotelho Cameroon. Fast home delivery anywhere in Cameroon.
Specificities of the UPC SC optical jumper:
- Product type : Optical fibre
- Connector type : SC UPC to LC UPC
- Fibre mode: OS2 9/125μm
- Insertion Loss: ≤ 0.3dB
- Minimum Bending Radius (Core): 10mm
- Attenuation at 1310nm: 0.36dB/km
- Number of Fibres: Duplex
- Cable Jacket: PVC
- Operating Temperature : -20 ~ 70°C
- Wave Length: 1310/1550nm
- Return loss : ≥ 50dB
- Minimum radius of curvature (optical jumper): 10D/5D (Dynamic/Static)
- Attenuation at 1550nm: 0.22dB/km
- Cable Diameter: 2.0mm
- Polarity: A (Tx) to B (Rx)
- Storage Temperature: -40 ~ 80°C
- Single mode optical fibre 9 / 125 (OS1).
- Maximum attenuation (db/km): 1300 / 1500 nm | 0.45 / 0.28.
- Cladding diameter: 3mm.
- Flexible and Abrasion Resistant, Durable for Indoor Use
- Designed for High Bandwidth and Transmission Speed over Long Distance
- Complies with IEC-61754 and TIA-604 (FOCIS)
- Length: 3m, 5m, 10m, 20m
- Condition: (new, used, refurbished): xxx