Get the ESSER RP1r extinguishing unit at the best price.

The RP1r extinguishing panel , comprising two safety microprocessors, has been developed by Notifier to manage the automatic extinguishing system sequence in accordance with EN12094:1/2003, EN54/2 and EN54/4 standards. The RP1r compact extinguishing panel includes a 65W power supply with a battery charger. The RP1r has 3 input zones allowing the direct connection of conventional 2-wire detectors or external extinguishing pushbuttons. The extinguishing panel also includes two electronically monitored and protected circuits and two sounder outputs for zone or general alarm.

On the front panel of the control panel there are function buttons, a switch-off button (yellow) and a 2-digit display which indicates the seconds remaining before switch-off. There is also a GAS extinguishing indicator and a key switch for the selection of the operating mode: automatic, manual or off.

Treat yourself to the ESS-RP1R-XP RP1r EXP extinguishing unit at the best price on the market and discover many other products in the ESSER category on Glotelho.cm, the leader in online sales in Cameroon.

Features of the ESSER RP1r Extinguishing Panel - EXP ESS-RP1R-XP:

• Brand : ESSER
• Product type : Extinguishing unit
• Category : Esser
• Model : EXP ESS-RP1R-XP
• Compact extinguishing unit controlled by a double
  microprocessor.
• Complies with EN54-2/4 and EN12094/1:2003 standards.
• Bosec certified.
• 2 detection zones for conventional detectors and
  a third configurable for detectors or
  push buttons.
• Manual abort switch and
  temporary interruption (hold).
• Day/Night function with a configurable delay from 30 to
  300 sec and a verification time of 1 up to 10 min.
• Delays disabled from the keypad (optional), with a
  alarm push button Or with two zones in
  alarm.
• Input circuit for flow and pressure control
  low, door opening and disarming
  mechanically from extinction.
• Two extinguishing circuits. The second circuit can be
  used independently for pre-activation.
• Display showing the seconds remaining before
  extinction.
• Two monitored siren outputs (2x250mA).
• 36 LEDs for quick identification of events.
• Relay for pre-alarm, general alarm, extinguishing
  carried out, extinguishing out of order, automatic and
  manual, the extinguishing output fault and the fault
  general.
• Two aux power outputs. (500mA resettable and not
  resettable).
• Digital inputs for configured remote actions
  such as: system reset, evacuation, sirens off
  or delay on/off.
• Removable terminals for all connections.
• Status display software from the PC with
  a remote connection and a maintenance option.
• VSN-4REL relay card to be provided to meet the
  mandatory options 4.26 of standard EN1094-1
  (Belgium)
• Warranty: 12 Months