Discover the Battery Terminal Connectors for a top-of-the-line car
This 4-pin battery terminal connector for wire connection. It is designed for multiple cable connections and with the Alan keys, it is easy to install. The wiring is easy to modify.
The robust battery terminal has sufficient strength, it can be connected very firmly when tightening the screws without breaking. The wiring is convenient and allows for a firm connection. It fits SAE/JIS Type A round post car batteries. It is important to remember not to over tighten the screws.
For wire sizes 4.1 to 8.2 mm (AWG 0 to 16) or 13.5 to 53.5 mm², the minimum wire size is : 16 mm (5/8"). Max. wire clamp 9.5 mm/0.37 inch, min. clamp: 6.5 mm/0.25 inch.
After installing the battery, connect to the battery terminals by pressing the lever, so the need for tools is not necessary.
The positive battery terminal connector (17.5 mm-19.1 mm) + negative battery terminal connector (15.9 mm-17.5 mm). The positive negative battery terminal clamp fits most battery models. It works well for replacing worn and corroded terminals.
The battery terminals are made of tinned copper, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss. The battery terminals are made of brass and the connector surface has been tinned, which is very effective in preventing corrosion.
These battery terminal connectors can be used for cars, vans, caravans, motorhomes, truck batteries, car audio, etc. Just make sure you connect the right terminal for the right polarity. For wire diameters (4AWG-1AWG) and ring terminals (8AWG), after installing the battery, connect to the battery terminals by pressing the lever.
Feel free to order this Battery Terminal Connectors at very good price and have it delivered anywhere in Cameroon.
Characteristics of the battery connector
- Product dimensions: 12 x 8 x 2 cm ;
- Weight: 220 grams
- Manufacturer: ELECDON